| B1 | Rugged case with variable carrying handle for all FSP models |
| B10 | External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI
and for retrofit of |
| B15 | Pulse calibrator for FSP excludes option FSP-B3 |
| B16 | LAN interface 10/100 base T for FSP 1164.4391.XX and ESPI
1164.6407.XX |
| B18 | Removable hard disk with WinXP (factory installed) |
| B19 | Second hard disk for FSP-B18 incl. analyzer firmware for FSP with
WinXP |
| B1G | CPU RAM upgrade to 1GB. To upgrade FSP with CPU board
(1091.2895.00) with less than 1GB |
| B20 | Extended environment Spec, Random Vibration 1.9G / 0 - 55°C (not
retrofittable) |
| B28 | Trigger port for FSP,FSQ,FSU; for indication of trigger conditions |
| B29 | 20 Hz frequency extension to FSP13 and FSP30 not retrofittable |
| B3 | Audio demodulator AM/FM for FSP internal speaker, control and
phones connection |
| B30 | DC power supply 12 - 28 V for FSP spectrum analyzer and ESPI test
receiver |
| B31 | NiMH battery pack + charger for FSP and ESPI requires FSP-B1 and
FSP-B30 |
| B32 | Spare battery pack (NiMH) for FSP spectrum analyzer and ESPI test
receiver |
| B33 | Disabled USB ports, excludes FS-K9 |
| B4 | OCXO 10 MHz for FSP |
| B6 | TV trigger and adjustable RF power trigger (40 dB) for FSP |
| B70 | Demodulator hardware and memory extension for FS-K72/FS-K73 on FSP |
| B9 | Tracking generator for FSP 9 kHz - 3 GHz, I/Q modulator |
| C3 | Three years of depot calibration coverage based on the R&S
recommended calibration interval - includes test data. The first
calibration is included with product delivery with 2 additional
depot calibration(s). |
| C5 | Five years of calibration coverage based on the R&S recommended
calibration interval - includes test data. The first calibration is
included with product delivery with 4 additional depot
calibration(s). |
| DCV-2 | Documentation of calibration values |
| DCV-ZP | Printout of DCV (additional, in combination with DCV-Option only) |
| DKD | FSP30 DKD (ISO17025) calibration incl. ISO 9000 calibration (order
only with device) |
| FS-B33 | USB mass memory write protection, disables writing to USB memory
sticks (ex factory only) |
| FS-K30 | Application firmware for noise figure and gain measurements for
FSMR, FSP, FSQ, FSU |
| FS-K40 | Application firmware for phase noise measurements for FSMR, FSP,
FSQ, FSU |
| FS-K5 | Application firmware GSM/EDGE tests for FSP, FSU, FSQ |
| FS-K7 | FM demodulator, allows measurement of FM specific parameters (for
FMU, FSP, FSU) |
| FS-K72 | Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP,
FSU, FSQ |
| FS-K73 | Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP,
FSU, FSQ |
| FS-K73+ | 3GPP HSPA+ UE transmitter test, application firmware (for FSMR,
FSP, FSQ, FSU, FSUP, |
| FS-K74 | 3GPP HSDPA base station test application firmware for FSMR, FSU,
FSP, FSQ |
| FS-K74+ | 3GPP HSPA plus, base station test. Application firmware (for FSP,
FSQ, FSU, FSG; |
| FS-K76 | 3GPP TD-SCDMA base station test; application firmware for FSMR,
FSP, FSQ, FSU |
| FS-K77 | 3GPP TD-SCDMA mobile station test; application firmware for FSMR,
FSP, FSQ, FSU |
| FS-K8 | Application firmware for Bluetooth measurement on FSP, FSU and FSQ |
| FS-K82 | CDMA2000/1xEV-DV base station test application firmware for FSMR,
FSP, FSU, FSQ |
| FS-K83 | CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP,
FSQ, FSU |
| FS-K84 | 1xEV-DO base station test application firmware for FSMR, FSU, FSP,
FSQ |
| FS-K85 | 1xEV-DO mobile station test application firmware for FSMR, FSP,
FSQ, FSU |
| FS-K9 | Measurements with NRP power sensors
NRP-Z11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4 |
| K3 | Noise Figure Measurement Software |
| K30 | Application firmware for noise figure and gain measurements for
FSMR, FSP, FSQ, FSU |
| K4 | PHASE NOISE MEASUREMENT SW |
| K5 | Application firmware GSM/EDGE tests for FSP, FSU, FSQ |
| K7 | FM demodulator, allows measurement of FM specific parameters (for
FMU, FSP, FSU) |
| K8 | Application firmware for Bluetooth measurement on FSP, FSU and FSQ |
| K90 | Application firmware WLAN 802.11A TX tests (EVM, flatness, mask)
for FSP |
| K93 | Application firmware for WIMAX 802.16; OFDM/OFDMA measurements |
| R3 | REPAIR SERVICE 3 YEARS |
| R5 | Five years of depot repair coverage, including re-calibration if
necessary to complete the repair. First year of repair coverage is
provided by the 12-month new product warranty. |
| U2 | WINDOWS XP UPGRADE |
